NETGEAR XS708T User Manual page 50

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Table 13. SNTP Global Status information (continued)
Field
Last Attempt Status
Server IP Address
Address Type
Server Stratum
Reference Clock ID
Server mode
Unicast Server Max Entries
Unicast Server Current Entries The number of current valid unicast server entries configured for this client.
Broadcast Count
Configure an SNTP Server
SNTP assures accurate network device clock time synchronization up to the millisecond.
Time synchronization is performed by a network SNTP server. The switch operates only as
an SNTP client and cannot provide time services to other systems.
Time sources are established by strata. Strata define the accuracy of the reference clock. The
higher the stratum (where zero is the highest), the more accurate the clock. The device
receives time from Stratum 1 and above since it is itself a Stratum 2 device.
Description
The status of the last SNTP request or unsolicited message for both unicast
and broadcast modes. If no message was received from a server, a status of
Other is displayed. These values are appropriate for all operational modes.
• Other. The status of the last request is unknown.
• Success. The SNTP operation was successful and the system time was
updated.
• Request Timed Out. After an SNTP request was sent to an SNTP server,
the response timer expired before a response from the server was
received.
• Bad Date Encoded. The time provided by the SNTP server is not valid.
• Version Not Supported. The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized. The SNTP server is not synchronized with its
peers. This is indicated by the leap indicator field in the SNTP message.
• Server Kiss Of Death. The SNTP server indicated that no further queries
were to be sent to this server. This is indicated by a stratum field equal to
0 in a message received from a server.
The IP address of the server for the last received valid packet. If no message
was received from any server, an empty string is shown.
The address type of the SNTP server address for the last received valid
packet.
The claimed stratum of the server for the last received valid packet.
The reference clock identifier of the server for the last received valid packet.
The mode of the server for the last received valid packet.
The maximum number of unicast server entries that can be configured on this
client.
The number of unsolicited broadcast SNTP messages that were received and
processed by the SNTP client since the last reboot.
Configure System Information
50