NETGEAR XS708T User Manual page 114

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
15. Next to VLAN 1, select the check box.
16. In the ARP ACL Name field, specify the name of the DAI ACL to associate with the VLAN.
For example, enter arpACL.
17. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View DAI Statistics per VLAN

To view DAI statistics per VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System> Services > Dynamic ARP Inspection > DAI Statistics.
The DAI Statistics page displays.
Configure System Information
114
Change the Default IP Address of the