Configure Denial Of Service Settings - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The following table displays the nonconfigurable daylight saving status information.
Table 17. Daylight Saving (DST) Status information
Field
Daylight Saving (DST)
Begins At
Ends At
Offset (in Minutes)
Zone
Daylight Saving (DST) in Effect

Configure Denial of Service Settings

Use the Denial of Service (DoS) feature to configure DoS control. The switch software
provides support for classifying and blocking specific types of DoS attacks.
Configure Auto-DoS
The Auto-DoS Configuration page lets you automatically enable all the DoS features
available on the switch, except for the L4 Port attack. For information about the types of DoS
attacks the switch can monitor and block, see

To enable the Auto-DoS feature:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
Description
The Daylight Saving value, which is one of the following:
• Disable
• Recurring
• Recurring EU
• Recurring USA
• Non Recurring
Displays when the daylight saving time begins. This field is not
displayed when daylight saving time is disabled.
Displays when the daylight saving time ends. This field is not displayed
when daylight saving time is disabled.
The offset value in minutes.This field is not displayed when daylight
saving time is disabled.
The zone acronym. This field is not displayed when daylight saving
time is disabled.
Displays whether daylight saving time is in effect.
Configure Denial of Service
Configure System Information
58
on page 59.
Change the Default IP Address of the