Display The Auto-Voip Status - NETGEAR XS708T User Manual
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Display the Auto-VoIP Status
Use this page to display Auto-VoIP status.
To view the Auto-VoIP status:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching > Auto-VoIP > Auto-VoIP Status.
6.
To refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable Auto-VoIP status information.
Table 34. Auto-VoIP status
Field
Auto-VoIP VLAN ID
Maximum Number of Voice
Channels Supported
Number of Voice Channels
Detected
Description
The Auto-VoIP VLAN ID.
The maximum number of voice channels supported.
The number of VoIP channels prioritized successfully.
Configure Switching
148
Change the Default IP Address of the
Hide quick links:
Advertisement
Table of Contents
