Configure An Mvr Group - NETGEAR XS708T User Manual
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
9.
From the MVR Mode menu, specify the MVR mode of operation.
The options are compatible and dynamic. The default is compatible.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
11.
To refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable information displayed on the page.
Table 50. MVR Configuration information
Field
MVR Max Multicast Groups
MVR Current Multicast Groups
Configure an MVR Group
To configure an MVR group:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching > MVR > Advanced > MVR Group Configuration.
6.
In the MVR Group IP field, specify the IP address for the new MVR group.
7.
In the Count field, specify the number of contiguous MVR groups.
Definition
The maximum number of multicast groups that MVR supports.
Displays current number of the MVR groups allocated.
Configure Switching
190
Change the Default IP Address of the
Hide quick links:
Advertisement
Table of Contents
