View The Igmp Snooping Table - NETGEAR XS708T User Manual
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
9.
In the Max Response Time field, specify the time that the switch must wait after sending a
query on an interface because it did not receive a report for a particular group on that
interface.
Enter a value greater or equal to 1 and less than the group membership interval in
seconds. The default is 10 seconds. The configured value must be less than the group
membership interval.
10.
In the MRouter Timeout field, specify the time that the switch must wait to receive a query
on an interface before removing it from the list of interfaces with multicast routers attached.
Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero
indicates an infinite time-out, that is, no expiration.
11.
From the Fast Leave Mode menu, select whether fast leave mode is enabled.
The option are Enable and Disable. The default is Disable.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View the IGMP Snooping Table
Use the IGMP Snooping Table page to view all of the entries in the Multicast Forwarding
Database that were created for IGMP snooping.
To view the entries in the IGMP snooping table:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching> Multicast > IGMP Snooping > IGMP Snooping Table.
The IGMP Snooping Table page displays.
6.
In the Search By MAC Address field, specify the MAC address whose MFDB table entry
you want to view.
Change the Default IP Address of the
Configure Switching
170
Hide quick links:
Advertisement
Table of Contents
