Configure Memory Dump Settings And Perform A Full Memory Dump - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Configure Memory Dump Settings and Perform a Full Memory
Dump
You can perform a full memory dump to retrieve the core dump for the purpose of
troubleshooting.

To configure the memory dump settings, test a memory dump to a USB device, and
perform a full memory dump:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Maintenance > Troubleshooting > Full Memory Dump.
6. From the Protocol menu, select the protocol that must be used to save the core dump file:
• None. Disable the core dump. This is the default setting.
• USB. Sets the USB protocol.
7. In the File Path field, enter the path where the core dump file must be saved on the USB
device.
The form of the full file path is /mnt/usb-storage/<dir>. The file path must consist of
-, _, / and alphanumeric characters. Up to 64 characters can be used. The default is ./.
Change the Default IP Address of the
Maintenance
409