NETGEAR XS708T User Manual page 134
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching> VLAN > Advanced > MAC Based VLAN.
6.
In the MAC Address field, enter a valid MAC address to be bound to a VLAN ID.
This field is configurable only when a MAC-based VLAN is created.
7.
In the VLAN ID field, specify a VLAN ID in the range of 1 to 4093.
8.
Click the Add button.
The MAC address is added to the VLAN mapping.
Delete a MAC Address From VLAN Mapping
To delete a MAC address from VLAN mapping:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching> VLAN > Advanced > MAC Based VLAN.
The MAC Based VLAN Configuration page displays.
6.
In the MAC Address field, enter a valid MAC address.
This field is configurable only when a MAC-based VLAN exists.
7.
In the VLAN ID field, specify a VLAN ID in the range of 1 to 4093.
8.
Click the Delete button.
The MAC address is removed from the VLAN mapping.
Change the Default IP Address of the
Configure Switching
134
Hide quick links:
Advertisement
Table of Contents
