NETGEAR XS708T User Manual page 44

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Time > Time Configuration.
6. Select the Clock Source Local radio button.
7. In the Date field, specify the current date in months, days, and years (MM/DD/YYYY).
8. In the Time field, specify the current time in hours, minutes, and seconds (HH:MM:SS).
Note: If you do not enter a date and time, the switch calculates the date and
time using the CPU's clock cycle.
9. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure the Time Settings With SNTP

To configure the time by using SNTP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
Configure System Information
44
Change the Default IP Address of the
Change the Default IP Address of the