Configure Interface Settings - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The following table describes the naming convention for all interfaces available on the switch.
Table 3. Naming conventions for interfaces
Interface
Physical
Link aggregation group (LAG)
CPU management interface
Routing VLAN interfaces

Configure Interface Settings

For some features that allow you to configure interface settings, you can apply the same
settings simultaneously to any of the following:
• A single port
• Multiple ports
• All ports
• A single LAG
• Multiple LAGs
• All LAGs
• Multiple ports and LAGs
• All ports and LAGs
Many of the pages that allow you to configure or view interface settings include links to
display all ports, all LAGs, or all ports and LAGs on the page.
Use these links as follows:
• To display all ports, click the 1 link.
• To display all LAGs, click the LAGS link.
• To display all ports and LAGs, click the All link.
Description
The physical ports are 10 Gigabit
Ethernet interfaces and are
numbered sequentially starting
from one.
LAG interfaces are logical
interfaces that are used only for
bridging functions.
This is the internal switch interface
responsible for the switch base
MAC address. This interface is not
configurable and is always listed in
the MAC Address Table.
This is an interface used for routing
functionality.
Get Started
22
Example
xg1, xg2, xg12
l1, l2, l3
c1
VLAN 1, VLAN 2, VLAN 3