Configure Router Discovery - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
uses the link MTU as the IP MTU. The link MTU is the maximum frame size minus the
length of the Layer 2 header.
9. Click the Add button.
The VLAN routing interface is added for the selected VLAN ID.
The following table describes the nonconfigurable information displayed on the page.
Table 62. VLAN Routing nonconfigurable information
Field
Port
MAC Address
Routing Mode

Configure Router Discovery


To configure router discovery:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> Router Discovery > Router Discovery Configuration.
6. Select a check box to the left of the Interface column to select the router interface.
7. From the Advertise Mode menu, select Enable or Disable.
If you select Enable, router advertisements are transmitted from the selected interface.
Description
The interface assigned to the VLAN for routing.
The MAC address assigned to the VLAN routing interface.
Displays whether routing is enabled for the VLAN Routing Interface.
Configure Routing
223
Change the Default IP Address of the