NETGEAR XS708T User Manual page 106
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Statistics
Use this page to view and clear per-interface statistics about the DHCP messages filtered by
the DHCP snooping feature on untrusted interfaces.
To view and clear the DHCP snooping statistics:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 10.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select System> Services > DHCP Snooping > Statistics.
6.
Click Clear to clear all interfaces statistics.
Configure System Information
106
Change the Default IP Address of the
Hide quick links:
Advertisement
Table of Contents
