NETGEAR XS708T User Manual page 70

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
View Green Ethernet Remote Device Details

To view green Ethernet remote device information:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet >
The Green Ethernet Details page displays.
6. Scroll down to the Remote Device Information section.
7. Select the interface.
The following table describes the nonconfigurable fields.
Table 21. Green Ethernet Remote Device Information
Field
Remote ID
Remote Tw_sys_tx (uSec)
Remote Tw_sys_tx Echo (uSec)
Remote Tw_sys_rx (uSec)
Remote Tw_sys_rx Echo (uSec)
Remote Fallback Tw_sys (uSec)
Description
The remote client identifier assigned to the remote system.
Integer that indicates the value of Tw_sys that the remote system can
support.
Integer that indicates the value of Transmit Tw_sys echoed back by the
remote system.
Integer that indicates the value of Tw_sys that the remote system
requests from the local system.
Integer that indicates the value of Receive Tw_sys echoed back by the
remote system.
Integer that indicates the value of fallback Tw_sys that the remote
system is advertising.
Configure System Information
70
Change the Default IP Address of the

Green Ethernet Details.