NETGEAR XS708T User Manual page 364

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Table 89. Detailed port statistics
Field
ifIndex
Port Type
Port Channel ID
Port Role
STP Mode
STP State
Admin Mode
Flow Control Mode
LACP Mode
Physical Mode
Physical Status
Link Status
Link Trap
Description
This object indicates the ifIndex of the interface table entry associated with this
port on an adapter.
For normal ports this field displays Normal. Otherwise, the possible values are
as follows:
• Mirrored. This port is a participating in port mirroring as a mirrored port.
Look at the Port Mirroring pages for more information.
• Probe. This port is a participating in port mirroring as the probe port. Look
at the Port Mirroring pages for more information.
• Trunk Member. The port is a member of a link aggregation trunk. Look at
the Port Channel pages for more information.
If the port is a member of a port channel, the port channel's interface ID and
name are shown. Otherwise, Disable is shown.
Each MST bridge port that is enabled is assigned a port role for each spanning
tree. The port role is one of the following values: Root, Designated, Alternate,
Backup, Master, or Disabled.
The Spanning Tree Protocol administrative mode associated with the port or
port channel. The possible values are as follows:
• Enable. Spanning tree is enabled for this port.
• Disable. Spanning tree is disabled for this port.
The port's current Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state. The states are defined in IEEE 802.1D:
• Disabled
• Blocking
• Listening
• Learning
• Forwarding
• Broken
The port control administration state. The port must be enabled for it to be
allowed into the network. The default is Enabled.
Indicates whether flow control is enabled or disabled for the port. This field is not
valid for LAG interfaces.
Indicates the Link Aggregation Control Protocol administrative state. The mode
must be enabled for the port to participate in link aggregation.
Indicates the port speed and duplex mode. In autonegotiation mode the duplex
mode and speed are set from the autonegotiation process.
Indicates the port speed and duplex mode.
Indicates whether the link is up or down.
Indicates whether or not the port sends a trap when link status changes.
Monitor the System
364