Configure Multicast Router Interfaces - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping > IGMP VLAN Configuration.
The IGMP Snooping VLAN Configuration page displays.
6. Select the check box next to the VLAN ID.
7. Click the Delete button.
Snooping is disabled on the VLAN and the VLAN is removed from the table.

Configure Multicast Router Interfaces

You can configure an interface as the designated interface to which a multicast router is
attached. All IGMP packets snooped by the switch are forwarded to the multicast router
reachable from this interface. Configuring a multicast router interface is usually not required
because the switch automatically detects the multicast router and forwards IGMP packets
accordingly. It is required only if you want to make sure that the multicast router always
receives IGMP packets from the switch in a complex network.

To configure multicast router interfaces:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping > Multicast Router Configuration.
Change the Default IP Address of the
Configure Switching
174