NETGEAR XS708T User Manual page 36

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The CPU Utilization section shows the memory information, task-related information, and
percentage of CPU utilization per task.
The following table describes CPU Memory Status information.
Table 9. CPU Memory Status information
Field
Total System Memory
Available Memory
Configure the CPU Thresholds
The CPU Utilization Threshold notification feature allows you to configure thresholds that,
when exceeded, trigger a notification. The notification occurs through SNMP trap and syslog
messages.

To configure the CPU thresholds:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
Description
The total memory of the switch in KBytes.
The available memory space for the switch in KBytes.
Configure System Information
36
Change the Default IP Address of the