System Setup And Maintenance Settings; Port Characteristics - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
Table 96. General feature default settings (continued)
Feature Name/Setting
Auto-VoIP, OUI-Based
Admin Mode
Auto-VoIP VLAN
OUI-based priority

System Setup and Maintenance Settings

The following table describes the system setup and maintenance settings.
Table 97. System setup and maintenance settings
Feature
Boot code update
DHCP/manual IP
System name configuration
Configuration save/restore
Firmware upgrade
Restore defaults
Dual image support
Factory reset

Port Characteristics

The following table describes the port characteristics.
Table 98. Port characteristics
Feature
Auto negotiating speed and
full/half duplex
Auto MDI/MDIX
802.3x flow control/back pressure
Port mirroring: TX, RX, Both
Port trunking (aggregation)
Default
Disabled
2
7
Sets Supported
1
1
1
1
1
1 (web and front-panel button)
1
1
Sets Supported
All ports
for cross over cables on all ports
1 (per system)
1
8
Specifications and Default Settings
439
Default
N/A
DHCP enabled/192.168.0.239
NULL
N/A
N/A
N/A
Enabled
N/A
Default
Auto negotiation
Enabled
Disabled
Disabled
Preconfigured