NETGEAR XS708T User Manual page 407
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Maintenance > Troubleshooting > Traceroute IPv6.
6.
In the IPv6 Address/Host Name field, enter the IPv6 address or host name of the device for
which the path must be discovered.
7.
In the Probes Per Hop field, enter the number of probes per hop.
The default value is 3. The range is 1 to 10.
8.
In the Max TTL field, enter the maximum time to live (TTL) for the destination.
The default value is 30. The range is 1 to 255.
9.
In the Init TTL field, enter the initial TTL to be used.
The default value is 1. The range is 1 to 255.
10.
In the MaxFail field, enter the maximum number of failures allowed in the session.
The default value is 5. The range is 1 to 255.
11.
In the Interval (secs) field, enter the time between probes in seconds.
The default value is 3. The range is 1 to 60.
12.
In the Port field, enter the UDP destination port for the probe packets.
The default value is 33434. The range is 1–65535.
13.
In the Size field, enter the size of the probe packets.
The default value is 0. The range is 0 to 39936.
Maintenance
407
Hide quick links:
Advertisement
Table of Contents
