NETGEAR XS708T User Manual page 156

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. To refresh the page with the latest information about the switch, click the Update button.
The following table describes the CST Status information displayed on the page.
Table 38. CST port status
Field
Interface
Port Role
Designated Root
Designated Cost
Designated Bridge
Designated Port
Topology Change Acknowledge
Edge port
Point-to-point MAC
CST Regional Root
CST Path Cost
Port Forwarding State
Description
Identify the physical or port channel interfaces associated with VLANs
associated with the CST.
Each MST bridge port that is enabled is assigned a port role for each
spanning tree. The port role is one of the following values: Root Port,
Designated Port, Alternate Port, Backup Port, Master Port, or Disabled
Port.
Root bridge for the CST. It is made up using the bridge priority and the
base MAC address of the bridge.
Path cost offered to the LAN by the designated port.
Bridge identifier of the bridge with the designated port. It is made up
using the bridge priority and the base MAC address of the bridge.
Port identifier on the designated bridge that offers the lowest cost to the
LAN. It is made up from the port priority and the interface number of the
port.
Identifies whether the topology change acknowledgement flag is set for
the next BPDU to be transmitted for this port. It is either True or False.
Indicates whether the port is enabled as an edge port. It is either
Enabled or Disabled.
Derived value of the point-to-point status.
Bridge identifier of the CST regional root. It is made up using the bridge
priority and the base MAC address of the bridge.
Path cost to the CST regional root.
The forwarding state of this port.
Configure Switching
156