NETGEAR XS708T User Manual page 316
8-port, 12-port, and 16-port
10-gigabit smart managed pro switch
Hide thumbs
Also See for XS708T:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- Installation (2 pages)
Table of Contents
Advertisement
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Security > ACL > ACL Wizard.
6.
From the ACL Type menu, select the type of ACL.
You can select from the following ACL types:
•
ACL Based on Destination MAC. Creates an ACL based on the destination MAC
address, destination MAC mask, and VLAN.
•
ACL Based on Source MAC. Creates an ACL based on the source MAC address,
source MAC mask, and VLAN.
•
ACL Based on Destination IPv4. Creates an ACL based on the destination IPv4
address and IPv4 address mask.
•
ACL Based on Source IPv4. Creates an ACL based on the source IPv4 address and
IPv4 address mask.
•
ACL Based on Destination IPv6. Creates an ACL based on the destination IPv6
prefix and IPv6 prefix length.
•
ACL Based on Source IPv6. Creates an ACL based on the source IPv6 prefix and
IPv6 prefix length.
•
ACL Based on Destination IPv4 L4 Port. Creates an ACL based on the destination
IPv4 Layer 4 port number.
•
ACL Based on Source IPv4 L4 Port. Creates an ACL based on the source IPv4
Layer 4 port number.
•
ACL Based on Destination IPv6 L4 Port. Creates an ACL based on the destination
IPv6 Layer 4 port number.
•
ACL Based on Source IPv6 L4 Port. Creates an ACL based on the source IPv6
Layer 4 port number.
Manage Device Security
316
Hide quick links:
Advertisement
Table of Contents
