Replace The Seal Wash Sensor - Agilent Technologies 1260 Infinity II User Manual

7
Maintenance

Replace the Seal Wash Sensor

Replace the Seal Wash Sensor

Parts required p/n
5067-6172
Preparations • Shut-down the pump.
• Remove the seal wash tubing from the seal wash solvent bottle.
1
Remove the solvent inlet and outlet tubes from the seal
wash sensor.
3
Remove the seal wash sensor from the module chassis.
176
Description
Seal Wash Sensor Pre Assembly
2
Press at the sides of the seal wash sensor.
4
Remove the cable.
1260 Infinity II Flexible Pump User Manual