Waste counter limit exceeded
Error ID: 29147
The counter for the waste volume has exceeded the limit, which has been set
in the user interface.
• Parameter: None
Probable cause
1
2
Flow rate limit exceeded
Error ID: 29164
The flow rate of the quaternary pump has exceeded the limit, while the pump
runs in pressure controlled mode, e.g. during a pressure test.
• Parameter: None
Probable cause
1
2
3
4
1260 Infinity II Flexible Pump User Manual
The waste container is full.
Inappropriate setting for waste counter.
Leak
Bottle empty.
Shutoff valve closed (if applicable).
Drift of pressure sensor (unlikely for short
tests taking some minutes).
Error Information
Pump Error Messages
Suggested actions
Empty waste container.
• Reset waste counter.
• Adjust waste counter limit.
Suggested actions
Check for leaks in the pump and flow path.
Fill solvent bottle.
Open shutoff valve.
Replace pressure sensor.
6
103