Agilent Technologies 1260 Infinity II User Manual page 27

Power Cords
Country-specific power cords are available for the module. The female end of
all power cords is identical. It plugs into the power-input socket at the rear.
The male end of each power cord is different and designed to match the wall
socket of a particular country or region.
Agilent makes sure that your instrument is shipped with the power cord that
is suitable for your particular country or region.
Absence of ground connection
WA R N I N G
The absence of ground connection can lead to electric shock or short circuit.
➔
Unintended use of supplied power cords
WA R N I N G
Using power cords for unintended purposes can lead to personal injury or damage
of electronic equipment.
➔
➔
➔
Power cords
WA R N I N G
Solvents may damage electrical cables.
➔
➔
1260 Infinity II Flexible Pump User Manual
Never operate your instrumentation from a power outlet that has no ground
connection.
Never use a power cord other than the one that Agilent shipped with this
instrument.
Never use the power cords that Agilent Technologies supplies with this instrument
for any other equipment.
Never use cables other than the ones supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
Prevent electrical cables from getting in contact with solvents.
Exchange electrical cables after contact with solvents.
Site Requirements and Specifications
Site Requirements
2
27