Agilent Technologies 1260 Infinity II User Manual page 67

Table 8 Advanced method parameters
Parameter Limits
Primary Channel
Mixer Selection
1260 Infinity II Flexible Pump User Manual
Setting up the Pump with the Instrument Control Interface
Description
Using Automatic is recommended.
The primary channel can be specified as A to D for optimizing highly
specific methods. It is split up to deliver the first and last solvent package
created by the MCGV in order to optimize composition precision. The
primary channel does not change during a gradient, as long as the channel
is used. Using Automatic chooses the channel with the highest
percentage at start conditions before a gradient.
Click the down-arrow and select the mixer to use from the list:
• Use any mixer: The currently installed mixer is used, irrespective of its
type.
• Do not use mixer: The valve is set to bypass the mixer so that it is not
in the flow path.
• <Mixer Name>: Only the specified mixer may be used; it the mixer is
not found, the pump goes into a Not Ready state.
3
Using the Module
67