Agilent Technologies 1260 Infinity II User Manual page 61

Context Menu
The context menu of the dashboard panel contains the following commands:
1260 Infinity II Flexible Pump User Manual
Setting up the Pump with the Instrument Control Interface
Control
Method
Set Error Method
Identify Device
Switch Pump On/Off
Bottle Fillings
Prepare Pump...
Flush Filter On/Off
Displays the pump's Control dialog box.
Displays the pump's Method Setup dialog box.
Sets the method that is loaded if an error occurs to the
method that is currently available in the hardware.
Causes the LED on the front of the module to blink for a few
seconds.
Toggles the status of the pump, on or off.
Displays the Bottle Fillings dialog box.
Displays the Prepare Pump dialog box.
Allows you to flush a clogged inline filter, which is connected
to the Multi Purpose Valve, see
page 18. Use the pump self-test for checking the filter back
pressure. Do not use this option if no filter is installed!
Using the Module
"Filter Flush Mode" on
3
61