11
LAN Configuration
What You Have To Do First
What You Have To Do First
The module has an on-board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface (see
226
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label at the rear of the module
underneath the configuration switch (see
Figure 24
MAC label
•
the PC network card using a crossover network cable (point-to-point) or
•
a hub or switch using a standard LAN cable.
Figure 25
Location of LAN interfaces and MAC label
Figure 25
on page 226).
Figure 25
on page 226) to
1260 Infinity II Flexible Pump User Manual