U8: Driveworksez Monitors - YASKAWA A1000 HHP Programming Manual

A.15 U: Monitors
No.
(Addr. Name
Hex)
U6-20 Frequency Reference Bias
(7D4) (Up/Down 2)
U6-21
Offset Frequency
(7D5)
U6-22 Zero Servo Pulse
(62) Movement
U6-25
Feedback Control Output
(6B)
U6-26 Feed Forward Control
(6C) Output
<1> Values shown are specific to 400 V class drives. Multiply the value by 1.4375 for 575 V class drives. Multiply the value by 1.725 for 690 V class
drives.
u

U8: DriveWorksEZ Monitors

No.
(Addr. Name
Hex)
U8-01 to
U8-10 DriveWorksEZ Custom
(1950 to Monitor 1 to 10
1959)
U8-11 to
U8-13 DriveWorksEZ Version
(195A to Control Monitor 1 to 3
195C)
306
Description
All Modes
Displays the bias value used to adjust the frequency reference.
All Modes
Displays the frequency added to the main frequency reference.
V/f V/f w PG OLV
OLV/PM AOLV/PM CLV/PM
Displays how far the rotor has moved from its last position in PG pulses
(multiplied by 4).
V/f V/f w PG OLV
OLV/PM AOLV/PM CLV/PM
Output monitor for the ASR speed loop.
V/f V/f w PG OLV
OLV/PM AOLV/PM CLV/PM
Output monitor for Feed Forward control.
Description
All Modes
DriveWorksEZ Custom Monitor 1 to 10
All Modes
DriveWorksEZ Version Control Monitor 1 to 3
YASKAWA ELECTRIC SIEP YEAHHP 01B YASKAWA AC Drive – A1000 HHP Programming Manual
CLV
CLV
CLV
Analog Output
Unit
Level
10 V: Max frequency 0.1%
– 0.1%
10 V: No. of pulses per
1
revolution
10 V: Motor secondary
0.01%
rated current
10 V: Motor secondary
0.01%
rated current
Analog Output
Unit
Level
10 V: 100% 0.01%
No signal output
–
available