Understanding Parameter Descriptions; Understanding Parameter Descriptions; A1-02 Control Modes, Symbols, And Terms - YASKAWA A1000 HHP Programming Manual

A.1 Understanding Parameter Descriptions
A.1 Understanding Parameter Descriptions
u

A1-02 Control Modes, Symbols, and Terms

The table below lists terms and symbols used in this section to indicate which parameters are available in which control modes.
Symbol
Parameter is available in all control modes.
All Modes
Parameter is available when operating the drive with V/f Control.
V/f V/f
Parameter is available when operating the drive with V/f with PG Control.
V/f w PG V/f w PG
Parameter is available when operating the drive with Open Loop Vector.
OLV OLV OLV OLV
Parameter is available when operating the drive with Closed Loop Vector.
CLV CLV
OLV/PM OLV/PM Parameter is available when operating the drive with Open Loop Vector for PM motors.
AOLV/PM AOLV/PM Parameter is available when operating the drive with Advanced Open Loop Vector for PM motors.
CLV/PM CLV/PM Parameter is available when operating the drive with Closed Loop Vector for PM motors.
Parameter is NOT available when operating the drive in the control mode.
Parameter can be changed during run.
Refers to a second motor when the drive is operating two motors. Switch between these motors using the multi-
Motor 2
function input terminals.
<99> PM motor control modes are not available in A1000 HHP drive models.
236
Table A.1 Symbols and Icons Used in Parameter Descriptions
YASKAWA ELECTRIC SIEP YEAHHP 01B YASKAWA AC Drive – A1000 HHP Programming Manual
Description
<99>
<99>
<99>