B2: Dc Injection Braking And Short Circuit Braking - YASKAWA A1000 HHP Programming Manual

No.
(Addr. Name
Hex)
b1-16 Run Command
(1C5) Selection 2
b1-17
Run Command at Power Up
(1C6)
<1> Settings 2 and 3 are not available in CLV.
u

b2: DC Injection Braking and Short Circuit Braking

No.
(Addr. Name
Hex)
b2-01 DC Injection Braking Start
(189) Frequency
b2-02 DC Injection Braking
(18A) Current
b2-03 DC Injection Braking Time
(18B) at Start
b2-04 DC Injection Braking Time
(18C) at Stop
b2-08 Magnetic Flux
(190) Compensation Value
<1> Default setting is determined by parameter A1-02, Control Method Selection.
YASKAWA ELECTRIC SIEP YEAHHP 01B YASKAWA AC Drive – A1000 HHP Programming Manual
Description
All Modes
Enabled when a terminal set for "External reference" (H1-oo = 2) closes.
0: Digital operator
1: Digital input terminals
2: MEMOBUS/Modbus communications
3: Option card
All Modes
0: Disregarded. A new Run command must be issued after power up.
1: Allowed. Motor will start immediately after power up if a Run command
is already enabled.
Description
All Modes
Sets the frequency at which DC Injection Braking starts when "Ramp to stop"
(b1-03 = 0) is selected.
V/f V/f V/f w PG V/f w PG OLV OLV
OLV/PM OLV/PM AOLV/PM CLV/PM
Sets the DC Injection Braking current as a percentage of the drive rated current.
V/f V/f V/f V/f V/f w PG V/f w PG V/f w PG V/f w PG OLV OLV OLV OLV
OLV/PM OLV/PM OLV/PM OLV/PM AOLV/PM AOLV/PM CLV/PM CLV/PM CLV/PM CLV/PM
Sets DC Injection Braking (Zero Speed Control when in CLV and CLV/PM)
time at start. Disabled when set to 0.00 seconds.
V/f V/f V/f V/f V/f w PG V/f w PG V/f w PG V/f w PG OLV OLV OLV OLV
OLV/PM OLV/PM OLV/PM OLV/PM AOLV/PM AOLV/PM CLV/PM CLV/PM CLV/PM CLV/PM
Sets DC Injection Braking (Zero Speed Control when in CLV and CLV/PM)
time at stop.
V/f V/f w PG OLV
OLV/PM AOLV/PM CLV/PM
Sets the magnetic flux compensation as a percentage of the no-load current
value (E2-03).
CLV
CLV CLV CLV CLV
CLV CLV CLV CLV
CLV
A.4 b: Application
Values Page
Default: 0
25
Range: 0 to 3
Default: 0
25
Range: 0, 1
Values Page
<1>
Default:
25
Min.: 0.0 Hz
Max.: 10.0 Hz
Default: 50%
Min.: 0 26
Max.: 100
Default: 0.00 s
Min.: 0.00 26
Max.: 10.00
<1>
Default:
26
Min.: 0.00 s
Max.: 10.00 s
Default: 0%
Min.: 0 27
Max.: 1000
241
A