Auto-Attendant For Incoming Analog Calls - ZyXEL Communications X6004 User Manual

Chapter 17 Outbound Line Group

17.3.2 Auto-Attendant for Incoming Analog Calls

Use this screen to select which auto-attendant should be used with this outbound line group.
See Chapter 18 on page 231
Attendant icon in the in the FXO Trunk section of the Outbound Group configuration
screen to view the screen as shown.
Figure 193 AA for FXO Trunks
Each field is described in the following table.
Table 74 AA for FXO Trunks
LABEL
Apply AA
Extension
Number for Fax
Extension
Number
Apply
Cancel
17.4 Add/Edit PRI Trunk
The screens for editing or adding a PRI trunk on the X6004 contain the same fields. Only the
screen used to add a PRI trunk is shown below. Click the Add (or Edit) icon in the PRI Trunk
section of the Outbound Line Group configuration screen to view the screen as shown.
Figure 194 Add/Edit PRI Trunk
210
for information on configuring auto-attendant. Click the Auto-
DESCRIPTION
Select the Auto-Attendant you want to use when calls come in on this outbound
line group. Select FAX if you want to forward all incoming calls on this outbound
line group to a fax machine located at a specific extension. Select Extension if
you want to directly forward all incoming calls through this outbound line group to
an extension or a hunting group number.
This field is only available if you select FAX in the Apply AA field. Type the
extension of the Fax machine you want to forward calls to.
This field is only available if you select Extension in the Apply AA field. Type an
extension or a hunting group number you want to forward calls to.
Click this to save your changes and to apply them to the X6004.
Click this to go to the Outbound Group screen without saving your changes.
X6004 User's Guide