Add An Administrator - ZyXEL Communications X6004 User Manual

Each field is described in the following table.
Table 135 Maintenance > Administrator List
LABEL
Administrator List
Delete
Username
Description
Rank
Add / Edit / Delete Click Add to configure a new administrator account on the X6004.

27.3.1 Add an Administrator

Use this screen to create new administrator accounts. To access this screen, click
Maintenance > Administrator List > Add.
Figure 280 Maintenance > Administrator List > Add
Each field is described in the following table.
Table 136 Maintenance > Administrator List > Add
LABEL
Create a new
administrator
Username
Password
Confirm
Password
Description
X6004 User's Guide
DESCRIPTION
Check the Delete box and click Delete to remove this account from the X6004.
This field displays the username of an administrator account on the X6004.
This field displays the description of an administrator account on the X6004.
This field displays the rank of an administrator account on the X6004. This field
displays:
• Full admin - if this account is allowed to perform all configuration changes on
the X6004.
• Debug admin - If this account is allowed to perform all configuration changes
on the X6004. This type of account is reserved for use by service technicians.
• Read only - if this account is only able to view configuration details on the
X6004.
Click Edit to edit an existing administrator account on the X6004.
Click Delete to remove an administrator account from the X6004.
DESCRIPTION
Type a username for this administrator. You can use up to 25 alphanumeric
characters. Spaces are not allowed. The first character must be a letter.
Type a password for this administrator account. You can use up to 32
alphanumeric characters and spaces are not allowed.
Retype the new password for this administrator account.
Type a short description for this administrator account. You can use up to 32
alphanumeric characters. Spaces are allowed.
Chapter 27 Administrator Accounts
319