The Add/Edit Hunt Group Screen - ZyXEL Communications X6004 User Manual

Chapter 14 Ring Group
Figure 175 Add/Edit Page Group
Each field is described in the following table.
Table 64 Add/Edit Page Group
LABEL
Entry Number
Pincode
Max Paging Time
Description
Extensions
Apply
Cancel

14.2.5 The Add/Edit Hunt Group Screen

The screens for editing or adding hunt groups on the X6004 contain the same fields. Only the
screen used to add hunt groups is shown below. Click the Add (or Edit) icon in the Hunt
section of the Ring Group configuration screen to view the screen as shown.
192
DESCRIPTION
Type the number you have to dial to call the extensions in this page group. This
number can be from 1 to 16 digits long.
Type the password you have to dial to call the extensions in this page group. This
number can be from 0 to 16 digits long and you can also use the "*" key. If you
leave this field blank then callers do not have to dial a Pincode to call the
extensions in this page group.
Type the maximum number of seconds that a person can page a group of
extensions.
Type a description for this page group.
Move the extensions you want to be in this page group to the Selected Member
column by highlighting them in the Peer Pool column and clicking the Right icon.
Remove the extensions you don't want to be in this page group from the Selected
Member column by highlighting them and clicking the Left icon.
Click Apply to save your changes and to apply them to the X6004.
Click Cancel to go back to the Ring Group configuration page without saving your
changes.
X6004 User's Guide