Add/Edit Trusted Peer - ZyXEL Communications X6004 User Manual

Table 82 AA for SIP Trunks
LABEL
Representative
Number
DDI/DID Mask
DDI/DID Number
Extension
Number
Add
Apply
Cancel

17.7 Add/Edit Trusted Peer

The screens for editing or adding trusted peers on the X6004 contain the same fields. Only the
screen used to add a trusted peer is shown below. Click the Add (or Edit) icon in the Trusted
Peer section of the Outbound Line Group configuration screen to view the screen as shown.
Figure 204 Add/Edit Trusted Peer
Each field is described in the following table.
Table 83 Add/Edit Trusted Peer
LABEL
Machine ID
Group Name
Description
Apply
Back to Outbound
Group
X6004 User's Guide
DESCRIPTION
This field displays the representative number of the SIP trunk if you have
configured one in the SIP trunk setting (see
Enter a number (1~10) to decide the number of digits you want to enter for the
next DDI/DID number(s).
Enter a DDI/DID number which allows outsiders to call and reach an extension
directly. The number of digits you can enter in this field depends on what you set in
the Representative Number DDI/DID Mask field.
Select the first radio box and enter the extension number to which the DDI/DID
number maps. Alternatively, select Auto-Attendant to forward the matched DDI
calls to auto-attendant.
Click this to add a new DDI/DID-to-extension mapping rule.
Click this to save your changes and to apply them to the X6004.
Click this to go to the Outbound Group screen without saving your changes.
DESCRIPTION
Select the ID of the X6004 on which you want to configure the trusted peer. This is
an internal name (not configurable) of the X6004. Only one choice is shown if you
have not configured ZyStack.
This field is not available when editing a Trusted Peer configuration.
Type the name of this trusted peer connection. You can use alpha-numeric
characters and spaces are not allowed.
Type the description for this trusted peer connection. You can use alpha-numeric
characters and spaces are allowed.
Click this to save your changes.
Click this to go to the Outbound Line Group screen without saving your changes.
Chapter 17 Outbound Line Group
Section 17.6.1 on page 216).
221