Register Ip Phones - ZyXEL Communications X6004 User Manual

Ip
Hide thumbs Also See for X6004:
Table of Contents

Advertisement

Chapter 3 Tutorials

3.1.3 Register IP Phones

After your network connections have been made, you can proceed with the SIP registration of
the IP phones on your network. The next figure shows a typical SIP registration screen of a
ZyXEL IP phone. This is a sample screen only, but it includes all the key fields necessary to
complete a SIP registration. It shows the SIP registration of an IP phone with the extension
1001.
Figure 18 Example IP Phone SIP Registration Screen
Complete the SIP registration for all the IP phones on your network. When all the phones are
registered, you can make internal calls by dialing the extension number assigned to each
phone.
3.1.4 Auto Provisioning
A ZyXEL IP phone that supports auto provisioning can get a configuration text file from the
X6004 (see
the SIP settings that the SIP device uses to register with the X6004. The following graphic
shows an IP phone (A), softphone (B), VoIP gateway (C), and ATA (D) downloading
configuration text files from the X6004.
54
Appendix on page 381
for supported IP phones). The configuration file contains
EXAMPLE
Extension Number of IP Phone
IP Address
of the X6004
SIP Password
(Prefix + Extension + Postfix)
X6004 User's Guide

Advertisement

Table of Contents
loading

Table of Contents