ZyXEL Communications X6004 User Manual page 281

Table 114 ZyStack Status (continued)
LABEL
Type
Ping
Delete
Failsafe
ZyStack Add
Failure Log
Machine ID
Serial
Fail Reason
Clear Log
X6004 User's Guide
DESCRIPTION
This field displays the role this X6004 performs in the ZyStack. The options are:
• Master - controls configuration on all the other X6004s.
• Slave - all configuration is done on the slave from the master X6004.
Click a Ping button to test IP connectivity with one member of the ZyStack or click
Ping All to test IP connectivity with all members of the ZyStack. This field displays
N/A when this function is not available for a specified X6004. This field displays Ok if
you have a network connection from the master to the slave X6004.
This field displays the reason for not being able to delete an X6004 from the
ZyStack. The field displays as the following followed by hyphen and a ZyStack
X6004 serial number. For example, "timeout-b471c385" where b471c385 is a serial
number.
• timeout displays if the master X6004 was unable to establish a connection with
the X6004 that you wanted to remove from the ZyStack.
• wrong master displays if the X6004 is already a member of another ZyStack.
• wrong serial displays if the serial number did not match when removing this
X6004 from the ZyStack.
• N/A displays when the delete function was not performed or X6004(s) were
successfully deleted from the ZyStack.
This field displays the machine ID of the X6004 that has taken over the functions of
an X6004 that has failed. For example, if it displays IPPBX_003, then it means that
IPPBX_003 has failed and IPPBX_002 has taken over. This field displays N/A when
no any failsafe case happened on the X6004.
This table is a list of log entries regarding successful and unsuccessful attempts to
add X6004s to the ZyStack.
This field displays the system name of the X6004. The system name is automatically
assigned to the X6004 based on when it was added to the ZyStack. IPPBX_001 is
always the master followed by slaves IPPBX_002, IPPBX_003 and so on.
This field displays the serial number that was entered when trying to add this X6004
to the ZyStack.
This field displays the reason for not being able to add an X6004 to the ZyStack. The
field displays:
• timeout - if the master X6004 was unable to establish a connection with the
X6004 that wanted to join the ZyStack.
• wrong master - if the X6004 is already a member of another ZyStack.
• wrong serial - if an incorrect serial number was entered when adding this X6004
to the ZyStack.
Click the Clear button to erase a ZyStack failure log.
Chapter 22 ZyStack
281