Auto Provision Edit Settings - ZyXEL Communications X6004 User Manual

Figure 122 Configuration > PBX > Server Configuration > Auto Provision
Each field is described in the following table.
Table 29 Configuration > PBX > Server Configuration > Auto Provision
LABEL
Configuration
Phone Numbers
MAC Address
Serial No.
SPTGEN File
Exist
Edit
View SPTGEN

7.2.1 Auto Provision Edit Settings

Use this screen to set up the auto provisioning settings for an extension on the X6004 and
associate it with a ZyXEL device on your network. To access this screen, click Configuration
> PBX > Server Configuration > Auto Provision > Edit.
Figure 123 Configuration > PBX > Server Configuration > Auto Provision > Edit
X6004 User's Guide
DESCRIPTION
This field displays the extension number configured on the X6004.
This field displays the MAC address of the ZyXEL device specified to receive
configuration settings from the X6004.
This field is blank for extensions assigned to software based IP phones.
This field displays the serial number of the software based IP phone specified to
receive configuration settings from the X6004.
This field is blank for extensions assigned to hardware based IP phones.
This field displays Yes, if a configuration file (SPTGEN file) has been created. It
displays No, if an SPTGEN file has not been created.
Click the Edit icon to create a configuration file and associate it with a ZyXEL
device on your network. The Auto Provision Settings screen opens.
Click the Advanced icon to view the settings in the configuration file.
Chapter 7 Auto Provision
133