The Set Call Access Code Screen - ZyXEL Communications X6004 User Manual

Each field is described in the following table.
Table 68 Configuration > PBX > Extension Management > Call Access Code
LABEL
Delete
Group
Access Code
Add, Edit, Delete

16.2.1 The Set Call Access Code Screen

Use this screen to edit or create an access code on the X6004. To access this screen, click the
Edit or Add icons in the Call Access Code screen.
Figure 183 Configuration > PBX > Extension Management > Call Access Code: Edit/Add
Each field is described in the following table.
Table 69 Configuration > PBX > Extension Management > Call Access Code: Edit/Add
LABEL
Set Call Access
Code
Group
Access Code
Apply
Cancel
16.3 The Internal Extension Length Screen
Specify the length range of phone numbers for internal calls. The X6004 treats these calls as
an extension to extension call and does not try to use an outside line when making these calls.
If the length of the number dialed fits in this range, but the extension does not exist on the
X6004 then the call is dropped.
Click Configuration > PBX > Extension Management > Call Access Code > Internal
Extension Length, to view the screen as shown.
X6004 User's Guide
DESCRIPTION
Check the Delete box and click Delete to remove this call access code setting.
This field displays an authority group name that has been set up with an access
code.
This field displays the access code.
Click one of the following options:
• Add - to set up an access code for an authority group on the X6004.
• Edit - to change the access code for an authority group.
• Delete - remove an access code configured for an authority group.
DESCRIPTION
Select the authority group you want to configure a call access code for. You can
only create one call access code per authority group.
Type the access code for this authority group.
Click this to save your changes.
Click Cancel to return to Call Access Code screen without saving your changes.
Chapter 16 Call Access Code
201