Edit Group Management Associations - ZyXEL Communications X6004 User Manual

Table 94 Configuration > PBX > Group Management
LABEL
Description
Associations

20.2.1 Edit Group Management Associations

Use this screen to configure links from an authority group or an outbound line group to
authority groups, LCRs or ring groups configured on the X6004. To access this screen, click
the Advanced icon next to the group you want to configure in the Configuration > PBX >
Group Management screen.
Figure 234 Configuration > PBX > Group Management > Advanced
Each field is described in the following table.
Table 95 Configuration > PBX > Group Management > Advanced
LABEL
Accessible Group
List
Group Name
Description
Group Type
Associations
Apply
Cancel
X6004 User's Guide
DESCRIPTION
This field displays the description of this group.
Click the Advanced icon to configure links for an authority or an outbound line
group.
DESCRIPTION
The table below shows which links you can create from the group (authority group
or outbound line group) identified in the Group Name field above the table.
This field displays the name of an authority group, LCR or ring group to which you
can configure a link.
This field displays the description of the group to which you can create a link.
This field identifies whether you are creating a link to:
Authority Group - another set of extensions on the X6004.
LCR - an outbound dialing rule containing outbound line groups.
Ring Group - a group of extensions in a page group, hunt group or both.
Select this checkbox to link a group you are configuring to another group.
Clear this checkbox to remove a link between the group you are configuring and
another group.
Click this to save your changes.
Click this to go back to the previous screen.
Chapter 20 Group Management
255