The Backup & Restore Screen - ZyXEL Communications X6004 User Manual

Chapter 31 System File Maintenance
• Base firmware - This type of file has a ".bin" extension, for example "100AVA2C0.bin".
This file contains basic operating instructions on how the device drivers interact with the
main processing unit of the X6004. In other words, when you upload a new ".bin" file you
might not see any changes in the GUI of the X6004, but you may experience improved
performance.
• Main firmware - This type of file has a ".rom" extension, for example "100AVA2C0.rom".
This file contains functional instructions for the X6004. When you upload this type of file,
you may see new features or changes in the GUI of the X6004.
• Factory Default Settings - This type of file has a ".romd" extension, for example
"100AVA2C0.romd". This file contains factory default settings for the X6004. When you
upload this type of file, all configuration will be cleared and replaced with default settings.
• Firmware and Configuration - This type of file has a ".binromromd" extension, for
example "100AVA2C0.binromromd". This file combines all of the files listed above into a
single uploadable file. It conveniently lets you upgrade the X6004 all at one time.
It is highly recommended to use a ".binromromd" file for firmware upgrade.
Find firmware at www.zyxel.com. Read the firmware release notes before uploading the
firmware files. The upload process uses HTTPS and may take several minutes. After a
successful upload, the system reboots.
31.2 The Backup & Restore Screen
Use this screen to back up or restore a configuration on the X6004. You can also use this
screen to reset the X6004 to the factory default settings. To access this screen, click
Maintenance > Backup & Restore.
Make sure you are using the correct backup ".zip" file when you restore your
configuration.
344
X6004 User's Guide