Configure An Fxo Trunk - ZyXEL Communications X6004 User Manual

Each field is described in the following table.
Table 72 Add/Edit FXO Trunk
LABEL
Machine ID
Group Name
Description
Apply
Back to Outbound
Group/Cancel

17.3.1 Configure an FXO Trunk

Use this screen to configure an FXO Trunk. Click the Advanced icon in the FXO Trunk
section of the Outbound Line Group configuration screen to view the screen as shown.
Figure 192 Configure an FXO Trunk
Each field is described in the following table.
Table 73 Configure an FXO Trunk
LABEL
Available
Interface
Used Interface
Apply
Cancel
X6004 User's Guide
DESCRIPTION
Select the ID of the X6004 on which you want to configure the FXO interface. This
is an internal name (not configurable) of the X6004. Only one choice is shown if
you have not configured ZyStack.
This field is not available when editing an FXO configuration.
Type the name of this FXO interface. You can use alpha-numeric and underscore
(_) characters. Spaces are not allowed.
Type the description for this FXO interface. You can use alpha-numeric, hyphen (-
) and underscore (_) characters. Spaces are allowed.
Click Apply to save your changes.
Click this to go to the Outbound Line Group screen without saving your changes.
DESCRIPTION
This column displays the FXO ports available on the X6004. Highlight one of the
FXO ports and click the Right icon if you want to add it to this outbound line group.
This column displays the FXO ports currently configured for this outbound line
group. Highlight one of the FXO ports and click the Left icon if you want to remove
it from the outbound line group.
If you configure more than one interfaces in this outbound line group, the X6004
check and pick one of them available for an outgoing call.
Click this to save your changes.
Click this to go to the Outbound Line Group screen without saving your changes.
Chapter 17 Outbound Line Group
209