Creating A Dialing Rule For Isdn - ZyXEL Communications X6004 User Manual

how to set up a dialing rule so that the extensions on your network can connect to the
ISDN.

3.4.2 Creating a Dialing Rule for ISDN

The following sections show you how to create outbound dialing rules (also referred to as
Least Cost Routing or LCR).
The LCRs determine which outside line the X6004 should use to complete outbound calls. In
our example we want to use the OG_PRI1 outbound line group to complete local calls.
Figure 62 Outbound Calls via ISDN
1000
Procedure:
1 In the web configurator, click Configuration > PBX > Outbound Line Management >
LCR to open the following screen.
Figure 63 Configuration > PBX > Outbound Line Management > LCR
2 Click the Add icon to open the following screen. Select the outbound line group from
the pool column that you want to add to this LCR (in our example this is
IPPBX_001:OG_PRI1 as configured in
icon to move them to the Selected column. Click Apply to save the outbound line group
in the LCR and then click the Add icon to configure a dial condition.
X6004 User's Guide
ISDN_call
BRI/PRI
Section 3.4.1 on page
Chapter 3 Tutorials
ISDN
69), then click the Right
73