Figure 26 Add Fxo Trunk - ZyXEL Communications X6004 User Manual

Chapter 3 Tutorials

Figure 26 Add FXO Trunk

3 The new outbound line group displays in the following screen. Now you will add the
FXO connections to the outbound line group. Click the outbound line group's Advanced
icon.
Figure 27 Configuration > PBX > Outbound Line Management > Outbound Line Group
4 The following screen displays. Select the FXO interfaces that you want to add to this
outbound line group and click the Right icon to move them to the Used Interface
column. Click Apply when you are done.
Figure 28 FXO Connection Configuration
5 The Outbound Line Group screen displays again. Click the Auto-Attendant icon.
Auto-Attendant routes incoming calls (see
Figure 29 Configuration > PBX > Outbound Line Management > Outbound Line Group
6 Make sure the Default AA option is selected (FAX is used to forward calls to a single
extension, such as your FAX machine's extension) and click Apply.
58
Chapter 18 on page 231 for details).
X6004 User's Guide