The Ssh > Add/Edit Screen - ZyXEL Communications X6004 User Manual

Figure 288
The following table describes the labels in this screen.
Table 143 Remote Management: SSH
LABEL
Enable SSH
Remote
Management
White List
#
Access Interface This field displays the interface(s) through which a computer may access the
Address
Add
Edit
Delete
30.5 The SSH > Add/Edit Screen
Use this screen to add trusted computer(s) which is allowed to access your X6004 using SSH.
Click the add or edit icon in the Maintenance > Administration > Remote Management >
SSH screen.
Figure 289 SSH: Add/Edit
X6004 User's Guide
Remote Management: SSH
DESCRIPTION
Select this to allow only computers which use IP addresses listed in this screen to
access your X6004 via an SSH connection.
This field displays the index number of records in this table.
X6004 using this service.
This field displays trusted computers' IP addresses that is allowed to communicate
with the X6004 using this service.
0.0.0.0 displayed means all computers are allowed to access the X6004 using this
service.
An IP address displayed (for example, a.b.c.d) means only the computer is allowed
to access the X6004 using this service.
An IP address with a subnet mask displayed (for example, a.b.c.d/255.255.255.0)
means only the computers in the subnet network are allowed to access the X6004
using this service.
Click Add to add a new trusted computer record.
Click Edit to modify a trusted computer record.
Click the Delete icon to delete a single record in this table. Alternatively, select one
or multiple records and click the Delete button to delete record(s) at one time.
Chapter 30 Remote Management
331