The Fxo Trunk Status Screen - ZyXEL Communications X6004 User Manual

Table 118 Monitor > Status Observation > BRI Peer (continued)
LABEL
Group
Number
Call Status

24.6 The FXO Trunk Status Screen

Use the FXO Trunk screen to view status information about external connections via FXO
interface cards. Click Monitor > Status Observation > FXO Trunk in the web configurator
to view the screen as shown.
Figure 264 Monitor > Status Observation > FXO Trunk
Each field is described in the following table.
Table 119 Monitor > Status Observation > FXO Trunk
LABEL
Query
Refresh interval
FXO Trunk
Machine ID
Slot
Port
X6004 User's Guide
DESCRIPTION
This field displays the authority group name which an ISDN extension number
associates with.
This field displays the extension number associated with an ISDN BRI port or it
displays N/A, if no ISDN extension has been configured for a BRI port.
This field displays busy if an ISDN extension is currently engaged, otherwise it
displays idle.
DESCRIPTION
Use this section to specify your query criteria. You can select an attribute, value
pair for your search. You can choose to query by:
• Machine ID - choose the X6004 (if you have a ZyStack configured) for which
you want to view status details of FXO connections.
• Call Status - select whether you want to view status details about FXO lines
that are currently busy or idle.
Click Query to update the status detail table in the FXO Trunk section of the
screen.
Enter how often (seconds) you want the X6004 to update this screen. Click Apply
to update the screen immediately.
If you do not want this screen to update periodically, enter 0.
This section displays the status detail table.
This field displays the auto-configured name of the X6004.
This field displays the slot (A - D) where the FXO interface card is installed.
This field displays the port number on the FXO interface card.
Chapter 24 Status Observation
293