Creating A Dialing Rule For Pstn - ZyXEL Communications X6004 User Manual

Figure 30 Confirm AA Setting
7 People from the outside world can now call the X6004 using the PSTN numbers
provided by your local telephone company. The Default AA prompts the callers to dial
the extension they would like to reach. See
how to set up a dialing rule so that the extensions on your network can connect to the
PSTN.

3.2.2 Creating a Dialing Rule for PSTN

The following sections show you how to create outbound dialing rules (also referred to as
Least Cost Routing or LCR).
The LCRs determine which outside line the X6004 should use to complete outbound calls. In
our example we want to use the PSTN1 outbound line group to complete local calls.
Figure 31 Outbound Calls via PSTN
1001
Procedure:
1 In the web configurator, click Configuration > PBX > Outbound Line Management >
LCR to open the following screen.
Figure 32 Configuration > PBX > Outbound Line Management > LCR
2 Click the Edit icon in the local_call section to open the following screen. Select the
outbound line group from the pool column that you want to add to this LCR (in our
example this is IPPBX_001:PSTN1 as configured in
click the Right icon to move them to the Selected column. Click Apply to save the
X6004 User's Guide
Section 3.2.2 on page 59
local_call
FXO
Section 3.2.1 on page
Chapter 3 Tutorials
for information on
PSTN
57), then
59