The Fxs Peer Status Screen - ZyXEL Communications X6004 User Manual

Table 116 Monitor > Status Observation > SIP Peer (continued)
LABEL
Machine ID
Group Name
User Name
Extension
Number
Registration
Status
Call Status

24.4 The FXS Peer Status Screen

Use the FXS Peer screen to view status information about the X6004's FXS extensions. Click
Monitor > Status Observation > FXS Peer in the web configurator to view the screen as
shown.
Figure 262 Monitor > Status Observation > FXS Peer
Each field is described in the following table.
Table 117 Monitor > Status Observation > FXS Peer
LABEL
Query
Refresh interval
X6004 User's Guide
DESCRIPTION
This field displays the auto-configured name of the X6004.
This field displays the authority group name to which an extension belongs.
This field displays the user name associated with a SIP extension.
This field displays the SIP extension number. For each SIP extension there is also
a web phone extension listed in the following format web + extension number.
For example, extension 1001 also has a web phone extension web1001 listed in
this table. The web phone extensions allow you to see whether a web phone is
being used for a specific SIP extension.
This field displays online, if an IP phone is registered with the X6004. It displays
offline if no IP phone is registered with the X6004 for a specific extension.
For the web phone feature, it displays online, if a user has logged in the web
phone feature, otherwise it displays offline.
This field displays busy if a SIP extension is currently engaged, otherwise it
displays idle.
DESCRIPTION
Use this section to specify your query criteria. You can select an attribute, value
pair for your search. You can choose to query by:
• Machine ID - choose the X6004 (if you have a ZyStack configured) for which
you want to view status details of FXS extensions.
• Call Status - select whether you want to view status details about extensions
that are currently busy or idle.
Click Query to update the status detail table in the FXS Peer section of the
screen.
Enter how often (seconds) you want the X6004 to update this screen. Click Apply
to update the screen immediately.
If you do not want this screen to update periodically, enter 0.
Chapter 24 Status Observation
291