Table of Contents
Advertisement
Chapter 18 Outbound Line Group
18.3.2 Auto-Attendant for Incoming Analog Calls
This screen allows you to select which auto-attendant should be used with this outbound line
group. See
click the Auto-Attendant icon in the in the FXO Trunk section of the Outbound Group.
Figure 194 AA for FXO Trunks
The following table describes the labels in this screen.
Table 75 AA for FXO Trunks
LABEL
Apply AA
Extension
Number
Extension
Number for Fax
Apply
Cancel
18.4 Add/Edit PRI Trunk
The screens for editing or adding a PRI trunk on the X2002 contain the same fields. Only the
screen used to add a PRI trunk is shown below. To display, click the Add (or Edit) icon in the
PRI Trunk section of the Outbound Line Group configuration screen.
Figure 195 Add/Edit PRI Trunk
216
Chapter 19 on page 233
for information on configuring auto-attendant. To display,
DESCRIPTION
Select the Auto-Attendant you want to use when calls come in on this outbound
line group. If you want to forward all incoming calls on this FXO trunk to be
forwarded to a fax machine located at a specific extension, then select FAX.
This field is only available if you select Extension in the Apply AA field. Type the
extension you want to forward calls to.
This field is only available if you select FAX in the Apply AA field. Type the
extension of the Fax machine you want to forward calls to.
Click this to save your changes and to apply them to the X2002.
Click this to go to the Outbound Group screen without saving your changes.
X2002 User's Guide
Advertisement
Table of Contents
