The Firmware Upgrade Screen - ZyXEL Communications X6004 User Manual

Chapter 31 System File Maintenance

31.3 The Firmware Upgrade Screen

Use this screen to view the current firmware version on the X6004 and to update the X6004 if
you have newer firmware. To access this screen, click the Maintenance > Firmware
Upgrade.
Do not turn off the device while firmware upload is in progress!
Figure 306 Maintenance > Firmware Upgrade
Each field is described in the following table.
Table 152 Maintenance > Firmware Upgrade
LABEL
Information
Boot Module:
Current Version
Released Date
Select Upload File Use this section to upload new firmware to the X6004.
File Path
Browse...
Upload
346
DESCRIPTION
This section displays information about the firmware currently installed on the
X6004.
This field indicates the version of the boot module installed on the X6004. The
boot module is software that tells the X6004 how to install and run the firmware.
Each firmware release only works when the proper boot module is installed on the
X6004.
This field indicates the firmware version number.
This field indicates the date and time that the currently installed firmware on the
X6004 was released.
Enter the location of the .bin, .rom, .romd or .binromromd file you want to upload,
or click Browse... to find it. You must decompress compressed (.zip) files before
you can upload them.
Click this to find the .bin, .rom, .romd or .binromromd file you want to upload.
Click this to begin uploading the selected file. This may take several minutes.
Note: Do not turn off the device while firmware upload is in
progress!
X6004 User's Guide