The Conference Calling Edit And Add Screen - ZyXEL Communications X6004 User Manual

Figure 236 Conference Room List
The following table describes the labels in this screen.
Table 97 Conference Room List
LABEL
DSP Resource
Machine ID
Conference
Share
Conference
Room List
Delete
Room
Machine ID
Number
Description
Add/Edit/Delete

21.3.2 The Conference Calling Edit and Add Screen

Use this screen to configure a new conference room. Click the Add icon to see the screen as
shown.
X6004 User's Guide
DESCRIPTION
This section displays the DSP resources available for each X6004 in a ZyStack. It
only displays one X6004 if you have not implemented ZyStacking.
This field displays the name of the X6004 in the ZyStack.
This field displays the number of DSP channels reserved for conference calls. You
can reserve DSP channels in the Configuration > PBX > Server Configuration >
DSP Management screen.
This field displays the number of unassigned DSP channels. Unassigned DSP
channel are shared by conference calls and calls via SIP trunks.
This section allows you to view conference room details as well as add or delete
conference rooms.
Select this checkbox and click Delete to remove this conference room from the
X6004.
This field displays the conference room number. This is the extension callers should
dial to enter this conference room.
This is the system name of the X6004.
This is the number of participants that can join this conference call at any one time.
This field displays the description you enter to identify this conference room.
Click the Add icon to create a new conference room.
Click the Edit icon to change the settings of an existing conference room on the
X6004.
Click the Delete icon to remove an existing conference room from the X6004.
Chapter 21 Call Services
261