Figure 42 Configuration > Pbx > Outbound Line Management > Outbound Line Group - ZyXEL Communications X6004 User Manual

Chapter 3 Tutorials
3 The new outbound line group displays in the following screen. Now you will configure
the connection to your ITSP. Click the outbound line group's Advanced icon.
Figure 42 Configuration > PBX > Outbound Line Management > Outbound Line Group
4 The following screen displays. Fill in the fields with the information provided by your
ITSP (in our example we use the sample information as shown in
Click Apply when you are done.
Figure 43 SIP Connection Configuration
5 The Outbound Line Group screen displays again. Click the Auto-Attendant icon in
the SIP Trunk section of the screen.
64
Table 3 on page 63).
X6004 User's Guide